Real Estate Investing 201

Posted on: November 20, 2008 Posted by: Real Estate We Blog Comments: 0

Real Estate Investing 201

Digging a little deeper into Flipping. In Real Estate Investing 101, Part I, we covered buying a house to resell for a short term profit. In this lesson, we’re going to delve a little deeper into flipping, run a scenario, and examine ways to maximize profit, while minimizing risk and making it happen fast.

Finding an appropriate property

Obviously the first ingredient in a profitable flip is the property. Despite what one may see on TV, it takes a little while to find good candidates. The various types of properties that may make good flip candidates are foreclosures or REO (bank owned properties), fixer-uppers, older homes that need updating, and ugly properties that are otherwise in good shape. Cost is obviously important, but condition is also very important.

Remember, not only will there be an expense for the repair, but there is also a cost to carry the property while the repairs are being done. For example, if Property A needs $20k in rehab, can be completed in 8 weeks, and will cost $2k/mo. to carry, it may be more attractive at $176k than Property B, which needs $50k in rehab, will require 16 weeks at $1500/mo. and is priced at $150k. This assumes that they would both be able to fetch the same price at the end of their renovation.

Homes may be in almost any price range. Condos may be purchased for as little as $40k, but sometimes there are opportunities with homes prices at $1M or more. In fact, the pricier homes have some advantages in some markets. Let’s cover a few price levels:

Under $100kPro– Cheap, easier to carry if it doesn’t sell as fast, possibly a larger market to sell into after completion. Con– Lots of competition bidding up the prices, requires tight control of expenses to be profitable, lots of market competition.

$200k to $400kPro– Fewer competitors bidding up prices, often a little larger pool of properties to pick from, usually higher margins. Con– Requires more capital, appropriate level of fixtures and finishes more important.

Over $700kPro– Often more generous margins, little competition, fewer buyers that will do work themselves, more fun to make (home theaters, high-end kitchens, etc.). Con– Bring your checkbook, higher level of capital needed, wrong finishes and fixtures will kill chances of a sale, tastes may be fickle.

Over course, you may have noticed that I left generous gaps. These are guidelines, and in different markets, the actual prices will need to be adjusted.

Putting together the numbers

I have a Excel spreadsheet that I will use to examine the transaction. It is available here. While it isn’t fancy, it does cover the information that we need in order to calculate the cost of the flip, and figure out what needs to happen in order to make a profit. There is nothing worse than getting into the flip, and finding out that you forgot something important, and you aren’t going to make money. Unlike a TV show, it is not very often that you can just raise your price in order to get your money back out of the deal.

When filling out the spreadsheet, the light gray areas are for users to input information. The light green areas have calculated values. Remember, the more accurate the input information, the more accurate your profit analysis will be.

The toughest and most important part is getting the right cost estimates for the renovations. The natural inclination is for these to be under-estimated. Many first time flippers plan on doing all or most of the work themselves. This isn’t a great long-term strategy, but there are advantages. The primary advantage is that the flipper increases the profit margin. However, the big danger is that flippers often under-value their own labor. Using painting as an example, painting the interior of a large home may require 20 gallons of paint. A professional painter may bid this job at $4000. The cost of paint would be approximately $600. A job like this might take 60 person/hours. Entering $600 for the cost of repainting the house does not place any value on the time involved in labor. So, even if the person flipping the property is planning on doing the work, they need to break out the labor for these tasks. More than one person flipping a property has spent hundreds of hours only to find that they $/hr were terribly low.

Putting together a team

A good flipper needs a good team. This is even more important if one plans to have more than one or two properties active at any given time. But, these are the people one needs to have available:

Real Estate Agent– A good agent will know what is on the market, and should be able to quickly determine what a good ARV (After Repair Value) for a given property will be. This agent will also know how to price the property to maximize return. That doesn’t always mean maximum price, those closing costs can add up, and if one’s capital is tied up, one can’t move to the next project.

Inspector– Spending a few hundred dollars for a good inspection is money well spent. Missing a failing HVAC system or a roof issue could cost thousands. Knowing that a particular siding or electrical has shown itself to be unreliable can also be very valuable. If one can find an inspector that will give good cost estimates of repairs and upgrades that need to be performed, one may be able to cut down on the number of contractors that need to be consulted prior to buying a property.

Contractors– These contacts can make or break a flip. If the work is good, fast, and appropriately priced it is well worth paying to have it done. Saving a few hundred dollars and spending a few thousand in carrying costs while you wait for a contractor that is behind schedule is not a good trade. Saving a few thousand, and then having to spend money to fix what wasn’t done well is also not a good trade… especially when you have to carry the property that much longer to get everything done.

Project Coordinator– If more than a couple of projects are running, having a person to help keep everything on track is vital. Even the best contractors will have people that need someone to make sure they are there on time, and doing the right work. Even the best flipper needs a second opinion, and someone to run errands or get the right materials.

Mortgage or Commercial Loan Broker– Carrying costs are another make or break expense. Having the capital to complete the project is a requirement. Being able to continually finance projects is also required. Most mortgage lenders (not brokers) don’t want to loan money to flippers without front loading. They make money by either carrying the loan, or charging up front fees. Since the goal is to NOT carry the property, they need to front load the fees. A good loan source can DRAMATICALLY lower your costs.

Selling strategies

In order to lower carrying costs, as well recapture capital for the next project, selling the property quickly is important. However, giving it away reduces the profit margin. There are a few things that can be done to help accomplish these conflicting goals.

Hire a good agent. They are part of the team. A good agent will help get the right exposure for the property, as well as make recommendations that will make the house more marketable. They will also have access to people that are in their team that will make the sale go more smoothly.

Stage the property. A vacant house makes it harder for buyers to mentally move in. A few rooms that are well staged will really increase the value in the minds of buyers, so it is generally well worth the cost. This is especially true for higher end homes, but may be the thing that tips the balance for ANY property.

Price it appropriately. Many experienced flippers will price a property 3%-5% below market in order to make it sell faster. This reduces “opportunity costs” and also lowers risk. Opportunity costs are the deals that one can’t pursue because their capital is tied up elsewhere. There is no risk after the property is sold.

Research. Plan. Prepare. Remember the old adage that it takes money to make money. This holds true in flipping real estate as well. But, it is vital that the money be appropriately targeted, well managed, and strictly controlled. This doesn’t mean that it shouldn’t be spent, but that it should be spent on the right things, and taking shortcuts may not be the best idea.

Written by Lane Bailey

Lane can be contacted through http://www.LaneBailey.com